Sliding Cross-Cut Table - A Modification

[wdelliott]

Dusty,
I see you answered my questions your fence earlier. No need to reply again.

I'm going to keep a look out for the extrusions. Shopsmith description for Part 515328 Fence Extrusion does not show a length.

Thanks again. Helpful.

[dusty]

Dusty,
I see you answered my questions your fence earlier. No need to reply again.

I'm going to keep a look out for the extrusions. Shopsmith description for Part 515328 Fence Extrusion does not show a length.

Thanks again. Helpful.

That extrusion is 25 7/16" long. The one from the bandsaw is 17 5/16" long.

Combined then I have a 42 3/4" long fence on the revised Sliding Cross Cut Table.

[keakap]

I just wonder what the other three sets of holes are for.

dado blade? Sanding disc? flip end-for-end?

Whatever. I'm now also convinced I will buy the Aux piece.

more good work.

[navycop]

Is there another example of the one that was on ebay? I guess I started following this thread to late and it is no longer available.

[dusty]

Is there another example of the one that was on ebay? I guess I started following this thread to late and it is no longer available.

If you are looking for description of the sled, I think this is it:

http://www.shopsmith.net/forums/showthread.htm?t=2587&highlight=cross

This one sells on ebay but the gentleman who makes it only does so many at a time. When they are all sold, you wait.

[JPG40504]

If you are looking for description of the sled, I think this is it:

http://www.shopsmith.net/forums/showthread.htm?t=2587&highlight=cross

This one sells on ebay but the gentleman who makes it only does so many at a time. When they are all sold, you wait.

Production of his items are only during his slow season for his primary occupation.

His slow season is the Winter Months and these items start reappearing in the first quarter of the year(Maybe December if things are REALLY slow).

The last time I looked, I believe he was offering it without the miter fence parts at a reduced price. He charges More for a ss version since it has the miter slot bars, and the generic version does not have any bars(you need to get yer own for non-ss use).

This effort on his FAMILY's part IS a work of passion for them(as well as supplemental income!) and the quality of the output is outstanding!

We owe them a debt of gratitude for their not only providing an excellent product, but a loyal ss user and provider of unique ss requirements.

Mixed emotions/opinion re ss restriction re 'competing' items being posted, BUT I feel this is in the realm of a tool review as the previous posts/threads have been which ARE 'allowed'.

P.S. The nitty gritty begins here >>>> http://www.shopsmith.net/forums/showpost.htm?p=27291&postcount=13
>>>>>>>>>>>>>>>>>>>>>>>> http://www.shopsmith.net/forums/showpost.htm?p=27292&postcount=14
>>>>>>>>>>>>>>>>>>>>>>>> http://www.shopsmith.net/forums/showpost.htm?p=27293&postcount=15
>>>>>>>>>>>>>>>>>>>>>>>> http://www.shopsmith.net/forums/showpost.htm?p=27294&postcount=16
>>>>>>>>>>>>>>>>>>>>>>>> http://www.shopsmith.net/forums/showpost.htm?p=27296&postcount=17
>>>>>>>>>>>>>>>>>>>>>>>> http://www.shopsmith.net/forums/showpost.htm?p=27297&postcount=18
>>>>>>>>>>>>>>>>>>>>>>>> http://www.shopsmith.net/forums/showpost.htm?p=27298&postcount=19
>>>>>>>>>>>>>>>>>>>>>>>> ThThThThaaaaaaatttttsssss AAAAALLLLLLL Folks!