Travelling Academies - Questions

[jferree]

Hi:

I hope I am posting this in the right area. If not, please inform me of my breech of etiquette, and I will correct it.

I am a new owner, actually, still awaiting receipt of my
shopsmith. I also purchased the bandsaw and the jointer.

Question - Fairly soon here, they will be having three academies (3
days consecutively).

02/24 Billings , MT Beginning Basics Class
02/25 Billings , MT Basics II Class
02/26 Billings , MT Beginning Lathe Turning Class

Is it worthwhile to try to take three consecutive days? Seems like
one could suffer from information overload, but then again, being
kind of remote, they not be around again for a while.

Any recommendations from anyone out there? Too much to digest?
Or? Go for it!!

Thanks in advance

jm

[rcoder]

I have been a SS user since the late 70s. I took the beginners class a long time ago. I wanted to learn better to do some turning so I took the 2nd and 3rd classes in Tucson a week ago.

I took the 2nd class for review and a look at whats new. The turning class is hands on and well worth it.

For sure take the 1st class and all three if you can afford it. Rick Davis is the instructor and knows woodworking and the SS.

Bob Coder

[Bruce]

I took the 2nd class in St. Louis a while back because I didn't think I would get much from the 1st one. Then I took the lathe class in my home town. Most of the guys (and gals) in both classes seemed to have been there for all three classes. I plan to take the 1st class some day to see the alignment and maintenance stuff they teach. So, like Bob said, if you can afford all three, go for it. But as a new user, definitely take the first one.

[roy_okc]

I bought a lightly used 1983 or 1984 SS 500 last summer. It worked fine and was in great shape but hadn't been lubed, adjusted, etc., in years. I attended all 3 of the Travelling Academies here in Oklahoma City and found them well worth the money. The first day included tuning up and lubricating the SS, a must to keep your investment running well and long, also safely operating the SS so you keep your body parts where and how they belong. The second day illustrated using a lot of the accessories, may not be as useful depending on your existing woodworking skill level. The third day, lathe, was the most fun for me, personally.

I'd highly suggest attending all 3 days if possible, but the first is a must for a new owner.

Roy

[dusty]

jm

I just finished the same three classes and I am very satisfied. I was especially impressed by the instructor. Rick certainly knows his stuff and you will see that when you take the class.

Tell him that you have received feedback about the class from Dustywoodworker and see what he says.

Incidently, you said the class is in Billings, MT. I sure hope that the weather doesn't stop you from getting back and worth. I am originally from Billings. Graduated from high school in 56 and haven't been back but for vacations since. Don't care for the weather.

Enjoy your classes. You'll never find a better instructor.
___________________
Making Sawdust Safely

[pj6]

I took advantage of the three days of classes and would recommend it for new users like myself. The classes gave me a lot of confidence to try different techniques.

[jferree]

Thanks one and all for your responses.

Good to know that the users carry on an active forum here, sure I will use it a lot.

Signed up for all three (me and the spousal unit will be in attendance).

Thanks again

jf

[kb0ppy]

YES!!!!!!!! DO IT, it is worth every penny and more! The first day is mostly how to set up and maintain the SS, second is a good advanced class, but not too far advanced for most. you WILL learn a LOT, take lots of notes!
ENJOY!
BILL