View Full Version : Accessory shelf adaptation
ryanbp01
12-11-2008, 02:03 PM
When Shopsmith had their "garage sale" back in October, I was able to pick up the newer version of the accessory shelf to replace the older model on my Shopsmith. I had assumed that it would fit the Storage station. It turns out the storage station is not shorter than the Mark V so I have plans to shorten one end and match the existing profile. I figure that, plus plywood cut to fit the span underneath the storage station should give me enough room for some mobile storage. I hope to accomplish this project this weekend and let you know how successful I was.
BPR
ryanbp01
12-15-2008, 10:09 AM
This project was successful! I also made a shelf that fits under the accessory stand. Now I have a place to place all of those attachments I use within easy reach. Now if can reorganize the rest of the shop...
BPR
a1gutterman
12-15-2008, 11:54 AM
Sounds like a great project, BPR! Glad that you had satisfactory results.
curiousgeorge
12-15-2008, 12:35 PM
Do you have any pictures?
8iowa
12-15-2008, 01:04 PM
Ryan:
I placed a 16" x 52" shelf under my storage station;
ryanbp01
12-15-2008, 01:42 PM
Ryan:
I placed a 16" x 52" shelf under my storage station;
That's what I did after I attached the shelf. I plan to post pictures, if I get the time between now and 12/25.
BPR