Jointech items in photos

[reible]

This post will contain a large number of pictures of Jointech pictures all collected in this one spot. They are all ones that at one time were on my Flickr site.

The first two post have what I like to call router insert details. The remaining posts will contain various other things so look for yourself... "it's a collection".

Only 18 views on these first 6 picture shown. Again they are in the Jointech information but this is also good for general knowledge so it wouldn't hurt to look at them.

Here is pictured a ring that is too large for say a 1/4" bit. You have several options to reduce the hole size.
2850

This is one of the optional rings that shows the opening around the bit like you would like to have it.
2851

This is a brass reducing ring, it is the same standard as the pc template guides but is flat and designed to reduce the opening around the bit.
2852

This is the ring that lets you use template guide bushings. This is the standard called "pc" or "PC" that is used by Porter Cable
2853

Keep reading on the next post below.

Ed

[reible]

The jointech table showing where the mounting plate sits. Phenolic material
2854

This is on the bottom of the plate and is used to snug the plate into the opening and keep it tight. It is called a "snugger". You can also see the bottom of one of the 8 set-screw used to level the plate in the table
2855

Ed

[reible]

This next bunch of 12 photos have to do with add-on's for the Jointech system. Again these are Jointech items but you may find some ideas that you could build for your system based on what you see here. If nothing else think of it as general education.

Table Featherboards
2856

Normal and Jumbo Faceplates (the jumbo is the add-on)
2857

VPF Coping Kit
2858

VPF Guard on Fence a bonus feature
2859

Fence Raiser
2860

7 more to go on this subject.

Ed

[reible]

Rear view of Fence Raiser
2861

Mounting Brackets
Adapt fence to router tables, comes in two sizes
2862

Brackets in use, almost and on the old OPR
2863

Brackets on OPR
This is mounted backwards to shows how the brackets work
2864

Fence Featherboard, having more then one might be nice??
2865

Just 2 more in this collection.

Ed

[reible]

Hold Down Clamp, small and helpful
2866

5-pc Ring Set
2867

That is all that I have at this time but I do want one more item... it made the budget cuts so just maybe I'll have something else to add???

Ed

[pinkiewerewolf]

Ed, I don't know if we've told you this lately but...
You ROCK!

[reible]

Two more post coming up on some information on the jointech system relating to questions about how it works. Didn't want to loose these.

2868

2869

2870

2871

2872

Few more pictures to follow

Ed

[reible]

2873

2874

2875

2876

OK that is that. Another bunch added

Ed