"Not SS realted" Anyone know what this is?

[Shop_Smith_Poppi]

I found this beauty in a grage sale last summer. Just realize I have not toyed with it. There is long story behind why I have not been doing much in my shop. Maybe some day I will talk about that.

http://i172.photobucket.com/albums/w29/thatdarndawg/Shop%20Smith/Cast%20Iron%20Lathe/193532.jpg

Yes it is a Lathe but my questions are:

Who made it?

When was it made?

How Do I hook it up to a power supply and make it work again?

Does any one know where I can find out about it or the answers to these questions?

http://i172.photobucket.com/albums/w29/thatdarndawg/Shop%20Smith/Cast%20Iron%20Lathe/193750.jpg

http://i172.photobucket.com/albums/w29/thatdarndawg/Shop%20Smith/Cast%20Iron%20Lathe/193716.jpg

http://i172.photobucket.com/albums/w29/thatdarndawg/Shop%20Smith/Cast%20Iron%20Lathe/193834.jpg

[Shop_Smith_Poppi]

only allowed 4 pics per post so here is a few more!

http://i172.photobucket.com/albums/w29/thatdarndawg/Shop%20Smith/Cast%20Iron%20Lathe/193811.jpg

http://i172.photobucket.com/albums/w29/thatdarndawg/Shop%20Smith/Cast%20Iron%20Lathe/193638.jpg

http://i172.photobucket.com/albums/w29/thatdarndawg/Shop%20Smith/Cast%20Iron%20Lathe/193716.jpg

http://i172.photobucket.com/albums/w29/thatdarndawg/Shop%20Smith/Cast%20Iron%20Lathe/193931.jpg

[wlhayesmfs]

Try the following site, have found a lot of old machines and information there
http://www.owwm.com/
Looks like an old wide belt driven lathe. Seen bigger ones like this but not this small.
Thanks

[Shop_Smith_Poppi]

Thanks Bill! Ill check it out. Ye sit is a wide belt driven lathe I have some other parts to it as well just forgot to take pictures of them. I am hoping to get it up and running one day!

Also if you ever find your self in NWA give me a hollar before you do I'll give you direction to the house.

[wlhayesmfs]

In NWA all the time. Where are you at? Most of these are driven from overhead and belts go through out the shop. Like of a smaller version of what you see at the woodshop at SDC in Branson running the lathes and other larger tools.
Thanks

[Shop_Smith_Poppi]

Well I have property in Little Flock Arkansas but i currently live in Pea Ridge because of a house fire back in July of 08.

[Shop_Smith_Poppi]

Here is few more pictures of the lathe and other parts I have.


http://photobucket.com/Cast_Iron_Lathe (http://photobucket.com/Cast_Iron_Lathe)

[JPG40504]

Here is few more pictures of the lathe and other parts I have.


http://photobucket.com/Cast_Iron_Lathe (http://photobucket.com/Cast_Iron_Lathe)
#14 looks like a nice bench vise!