Disk sander paper shredding

[woodbender]

Hi folks - newbee alert.

I bought a Mark V from a friend at work which is an '83 model. He basically had it in storage for the last 25 years. Including the disk paper.

The 25 year old sand paper worked like a charm! (But now the remainder of it kinda buckled and puckered from it's backing so I can't really use it.)

BUT I just bought some local green stuff, took off the old paper, dissolved all the old glue, cleaned off the disk plate, put the new green sand paper on a warm disk and,..

It is now shredded.

I sanded two small pieces of cherry and it's toast. I really mean small, these pieces were about 2"x3" and now there's poc-marks and divots all over the sanding disk.

What are you guys using for 12" sanding disks and where do you buy them? I looked all over Grand Rapids Michigan and basically found only one place that carries 12" sanding paper disks.

Thanks guys

[a1gutterman]

I buy mine from ShopSmith. They just happen to be having their annual sanding sale on this month. http://www.shopsmith.com/ownersite/catalog/sand09/

[beeg]

Hi folks - newbee alert.

The 25 year old sand paper worked like a charm! (But now the remainder of it kinda buckled and puckered from it's backing so I can't really use it.)

Thanks guys

You might try 3M 77 brand of adhesive to attach them to the disk.

[dusty]

Hi folks - newbee alert.

I bought a Mark V from a friend at work which is an '83 model. He basically had it in storage for the last 25 years. Including the disk paper.

The 25 year old sand paper worked like a charm! (But now the remainder of it kinda buckled and puckered from it's backing so I can't really use it.)

BUT I just bought some local green stuff, took off the old paper, dissolved all the old glue, cleaned off the disk plate, put the new green sand paper on a warm disk and,..

It is now shredded.

I sanded two small pieces of cherry and it's toast. I really mean small, these pieces were about 2"x3" and now there's poc-marks and divots all over the sanding disk.

What are you guys using for 12" sanding disks and where do you buy them? I looked all over Grand Rapids Michigan and basically found only one place that carries 12" sanding paper disks.

Thanks guys
I've never tried anything other than what Shopsmith sells. Watch for a sanding sale and buy enough to last a while (til the next sanding sale).

It must be your lucky day as there is a sanding sale in progress right now.

It ends on April 30. http://www.shopsmith.com/ownersite/catalog/sand09/sn_velcroalumoxidediscs.htm

Buyers Alert: There are sanding disks and then there are velcro backed sanding disks (which require a velcro backer disk).

[JPG40504]

You might try 3M 77 brand of adhesive to attach them to the disk.
ONLY try using 3M 77. It releases when you want it to. Other 3M products are not so co-operative.

[Bruce]

What do you mean by "green stuff"? I've never seen green sanding disks.

[dusty]

What do you mean by "green stuff"? I've never seen green sanding disks.
http://www.azautobodysupply.com/grindingdiscs1.html

Quite popular with those who do body work!

[wholeshoe]

I bought some at Menards and havent had any issues but I have just sanded Poplar and Pine with it too.

I will get you the brand name of the sand paper tonight.