PTWFE Chapter 19 Belt Sanding

[reible]

This week we will read the chapter on Belt Sanding. You can locate it at:
http://www.shopsmith.com/academy/beltsand/index.htm

I hope all that started this reading with us are still with us. If you are a few chapters behind please take a few minutes extra time this week and catch up.

Depending on how things go I'd like to make the jig shown in figure 19-25 sometime this summer. Some how I never got around to making one over all these years. (This and the jig saw were my only major extra tools for the shopsmith for a lot of years.)

Ed

[easterngray]

When I was making the Jelly bean box for my daughter I used the belt sander to chamfer the edge of the lid. Making chamfers with the belt sander is easy and fast! Alec

[JPG40504]

When I was making the Jelly bean box for my daughter I used the belt sander to chamfer the edge of the lid. Making chamfers with the belt sander is easy and fast! Alec

Indeed; If not TOO fast!:eek:

[charlese]

Yes, as many of us, I have used the belt sander in all of the configurations shown. I find it to be a wonderful machine. I even use it to sharpen lathe tools

I've also sanded several of my finger tips at different times. My gosh! this machine can be dangerous if one is not careful.

[beeg]

Also Chuck, it does a good job on knuckles too. :)

Now if I just didn't have to keep readjusting the tracking.