Christmas ornament

[nllaeder]

So when throwing out our Christmas tree yesterday, I had an idea.

This was my wife and my first Christmas that we stayed home (CO) and didn't fly to her parents' house in PA or mine in MI. So, it was our first Christmas tree together.

Anyway, my idea was to cut the bottom 1' of the trunk off and save it. I'd like to turn a Christmas ornament with this wood as a gift for my wife.

I understand that this is soft wood, but I'm sure with some care and sharp tools and a bunch of sandpaper, it can come out good.

First, how long do I let the piece of wood season in my garage? Should I cut a rough blank out of it to help it season?

Second, anyone ever turn a Christmas ornament? Wanna share dimensions?

Thanks in advance,

Nick

[mickyd]

So when throwing out our Christmas tree yesterday, I had an idea.

This was my wife and my first Christmas that we stayed home (CO) and didn't fly to her parents' house in PA or mine in MI. So, it was our first Christmas tree together.

Anyway, my idea was to cut the bottom 1' of the trunk off and save it. I'd like to turn a Christmas ornament with this wood as a gift for my wife.

I understand that this is soft wood, but I'm sure with some care and sharp tools and a bunch of sandpaper, it can come out good.

First, how long do I let the piece of wood season in my garage? Should I cut a rough blank out of it to help it season?

Second, anyone ever turn a Christmas ornament? Wanna share dimensions?

Thanks in advance,

Nick
Great idea and annual tradition. Why not do it every year incorporating the year indicator into the ornament!!

[iclark]

interesting idea. sounds like a fun tradition.

from what I understand, you want to take the bark off as soon as possible (that is where the various insects lurk) and put a coat of paint (whatever you have left over) on the ends and over each branch stub. the paint makes it dry more uniformly and cuts down on cracking during drying.

depending on how fast the trunk tapers, you might want to keep a couple of sections of trunk and play with the smaller pieces (turning while green and then packing in sawdust to dry or alcohol drying, as examples) to see what you want to do.

in terms of shape, to me, most bottle stopper shapes would make pretty tree ornaments. you can also lighten them by hollowing (bell shapes for example) or drilling or carving decorative transverse holes.

don't forget to take pictures and show us what you make.

Ivan

[charlese]

So when throwing out our Christmas tree yesterday, I had an idea.

Anyway, my idea was to cut the bottom 1' of the trunk off and save it. I'd like to turn a Christmas ornament with this wood as a gift for my wife...

I understand that this is soft wood,...First, how long do I let the piece of wood season in my garage? Should I cut a rough blank out of it to help it season?

Second, anyone ever turn a Christmas ornament? Wanna share dimensions?
Thanks in advance,
Nick

Hi Nick! Great Idea! But, in order to have that long butt stabilize and cure in time to turn for next Christmas You are going to need some help other than sitting it in your garage. You need to be concerned with checking even more than drying.

It's my guess that your tree was plantation grown and has only about 10 growth rings at the butt and is about 4" in diameter.

One substance to stabilize wood is polyethylene glycol. That's right - - same as automotive antifreeze. Since I have not used this myself I know nothing about the correct mixture - But Rockler does! The PEG they sell is a white waxy substance (pure PEG) not the green stuff we use in cars.

Here is the Rockler site. -- make sure to read the short paragraph behind the 'More Info' tab. They even have a book Rockler's price may seem a little high, but 10 lbs of the stuff should last quite a few years.
http://www.rockler.com/product.cfm?page=686&filter=stabilized%20wood

[------------------------]

Great idea!
Woodcraft has a couple of kits (3) that you could adapt or get an idea from. I am going to collect my tree wood right now and coat it in paste wax to slow down the checking.
Mark

[jdramsey]

One of my instructors told me that the rule of thumb for air drying rough sawn green lumber was a year per inch of thickness. If you're turning it, I'd turn a rough shape now. Then put it in a brown paper bag, stapled shut, and put it in a cool dry place. Then right before christmas, pull it out and finish turning it.

[rkh2]

Just to add to what jdramsey said, I was taught to also put a few handfuls of the shavings from the bowl in the bag as well. Not sure if that adds to the drying process or not, but that's what I have done with my green wood bowls.

[sandyj]

I have used a zip lock plastic bag and packed the small (5" x 4") billet in uncooked rice.
Place 1/2 rice in bag, place billet, fill rest of rice and zip it.
Dry the rice out in a microwave every month - remove from bag first.
2-3 mins on high.
Most times the billet usually dries out in 6 months or so.
Very little splitting or cracking.

Regards
Sandy in New Zealand