mickyd
01-27-2010, 11:15 AM
With the volume of various threads and posts related to technical info on the Mark 5 / V machines, I saw it fitting to start a thread that can compile 5 / V related information in one place. It will either contain the info directly or link out to appropriate areas. Informational commentary and dialog is welcome. To keep the thread on topic may be difficult. We'll see how this works.
PLEASE DON'T POST TO THIS THREAD UNTIL I LAY A BASIC FOUNDATION DOWN. I'LL DELETE THIS PARAGRAPH WHEN I'M DONE. IF YOU 'D LIKE TO COMMENT, USE A COMMUNITY THREAD OR EVEN POTPOURRI THREAD.
Troubleshooting and repair:
Motor sheaves - Damamged and sticking - this thread (http://www.shopsmith.net/forums/showthread.htm?t=5090)
Sawdust sessions - all (http://www.shopsmithacademy.com/Sawdust_Sessions.htm), Sawdust and Blackboard Session Searchable Index (http://www.shopsmith.net/forums/showthread.htm?t=3575&highlight=sawdust), SS Reborn 1: Bargain or Basketcase (http://www.shopsmithacademy.com/SS_Archives/SS121/SS121_Shopsmith_Reborn_Pt1.htm), SS Reborn 2: Cleaning and Inspecting (http://www.shopsmithacademy.com/SS_Archives/SS122/SS122_Shopsmith_Reborn_Pt2.htm), SS Reborn 3: Rebuilding the Drive Train (http://www.shopsmithacademy.com/SS_Archives/SS123/SS123_Shopsmith_Reborn_Pt3.htm), SS Reborn 4: Rebuilding the Quill (http://www.shopsmithacademy.com/SS_Archives/SS124/SS1224_Shopsmith_Reborn_Pt4.htm)
Repair procedures - All-In-One Wood Tools website (http://allinonewood.com/?page=shop/serviceadvisor&PHPSESSID=fab89202933b20d941c9fa26e639a3b9)
Fence Alignment (http://www.shopsmith.net/forums/showthread.htm?t=5204)
Drill chuck - Disassembly, inspection - This thread (http://www.shopsmith.net/forums/showthread.htm?t=4262&highlight=frozen+chuck)
Bearings (http://www.shopsmith.net/forums/showthread.htm?t=3235)
Gilmer clutch - Disassembly, cleaning, torque testing (http://www.shopsmith.net/forums/showthread.htm?p=32871#post32871)
Gilmer belt adjusting (http://www.shopsmith.net/forums/showpost.htm?p=78563&postcount=4)
Poly-V belt alignment - 1 (http://www.shopsmith.net/forums/showthread.htm?t=5546), 2 (http://www.shopsmith.net/forums/showthread.htm?t=3635),
Shopsmith parts and accessories (http://www.shopsmith.com/ownersite/partscat/partspricelistindex.htm) service site
Complete Mark V reassemble instructions (http://www.shopsmith.net/forums/showthread.htm?p=41339#post41339) by member JPG40504
Headstock disassembly instructions and parts list (http://www.shopsmithacademy.com/SS_Archives/SS122/SS122_Common_files/Blackboard_images/Inspection_and_Cleaning.pdf)
Disassemling and lubing a frozen drill chuck (http://www.shopsmith.net/forums/showthread.htm?t=4262&highlight=frozen+chuck)Restoration Threads - mickyd (http://www.shopsmith.net/forums/showthread.htm?t=3078), mikelst (http://www.shopsmith.net/forums/showthread.htm?t=5240), ddvann79 (http://www.shopsmith.net/forums/showthread.htm?p=77712#post77712), fiatben (http://www.shopsmith.net/forums/showthread.htm?t=5449)
Varioius paint color schemes - 1 (http://www.shopsmith.net/forums/showpost.htm?p=60834&postcount=10), 2 (http://www.shopsmith.net/forums/showpost.htm?p=60834&postcount=11), Heath's New Orleans Saints theme (http://www.shopsmith.net/forums/showthread.htm?t=4961), wannabewoodworker (http://www.shopsmith.net/forums/showthread.htm?p=64067#post64067)
Gallery of Restorations (http://www.shopsmith.net/forums/showthread.htm?p=63184#post63184)- DON'T MISS SEEING THIS THREADGeneral Information
Overall dimensions (http://www.shopsmith.net/forums/showpost.htm?p=59045&postcount=3) of a Mark 5 / V
Serial number data - Serial number table (http://www.shopsmith.com/ownersite/faq/markv.htm) from ShopSmith website, mickyd serial number table (http://www.shopsmith.net/forums/showpost.htm?p=37415&postcount=1) filling in the blanks on ShopSmith site table
Caster assembly instructions (http://www.shopsmith.net/forums/showpost.htm?p=62360&postcount=2), and this one (http://www.shopsmith.net/forums/showthread.htm?t=4110) too
Casting difference (http://www.shopsmith.net/forums/showthread.htm?t=3589&highlight=casting+tube)if you have 1-3/4" vs 1-7/8" bench tubes
Model 500, 505, 510, 520 differences (http://www.shopsmith.com/ownersite/MasterInside_4-28-08r2.pdf)
Model 510 lower saw guard on a model 500 (http://www.shopsmith.net/forums/showthread.htm?t=4566)
Mark 5 / V manual revision levels (http://www.shopsmith.net/forums/showthread.htm?t=4982)
Bench and way tube outside diameters (http://www.shopsmith.net/forums/showthread.htm?t=6342)
The Evolution of the Mark 5/V (http://www.songofthegreatlakes.com/ssmarkvevolution.htm) - Shows the ShopSmith throughout the years
Upper and lower sawgaurd - Mark 5 PN 505627 and 28 (http://www.shopsmith.net/forums/showpost.htm?p=79017&postcount=10), Mark 5 PN ?? (http://www.shopsmith.net/forums/showpost.htm?p=78980&postcount=4)
The mystery drips on the Mark 5/V legs - judaspre1982 and mickyd's (http://www.shopsmith.net/forums/showpost.htm?p=42973&postcount=14), fiatben's (http://www.shopsmith.net/forums/showpost.htm?p=66565&postcount=101)
Interesting machine modifications
Miter gage - Adding one (http://www.shopsmith.net/forums/showthread.htm?t=1708&highlight=miter+slot) to your extension table courtesy dusty
Model 500 table height adjustment handle knob conversion over to the circular style (http://www.shopsmith.net/forums/showthread.htm?t=895&highlight=height)
Installing 505/10/20 Crank (http://www.shopsmith.net/forums/showthread.htm?t=3302)on 500 table lift
PLEASE DON'T POST TO THIS THREAD UNTIL I LAY A BASIC FOUNDATION DOWN. I'LL DELETE THIS PARAGRAPH WHEN I'M DONE. IF YOU 'D LIKE TO COMMENT, USE A COMMUNITY THREAD OR EVEN POTPOURRI THREAD.
Troubleshooting and repair:
Motor sheaves - Damamged and sticking - this thread (http://www.shopsmith.net/forums/showthread.htm?t=5090)
Sawdust sessions - all (http://www.shopsmithacademy.com/Sawdust_Sessions.htm), Sawdust and Blackboard Session Searchable Index (http://www.shopsmith.net/forums/showthread.htm?t=3575&highlight=sawdust), SS Reborn 1: Bargain or Basketcase (http://www.shopsmithacademy.com/SS_Archives/SS121/SS121_Shopsmith_Reborn_Pt1.htm), SS Reborn 2: Cleaning and Inspecting (http://www.shopsmithacademy.com/SS_Archives/SS122/SS122_Shopsmith_Reborn_Pt2.htm), SS Reborn 3: Rebuilding the Drive Train (http://www.shopsmithacademy.com/SS_Archives/SS123/SS123_Shopsmith_Reborn_Pt3.htm), SS Reborn 4: Rebuilding the Quill (http://www.shopsmithacademy.com/SS_Archives/SS124/SS1224_Shopsmith_Reborn_Pt4.htm)
Repair procedures - All-In-One Wood Tools website (http://allinonewood.com/?page=shop/serviceadvisor&PHPSESSID=fab89202933b20d941c9fa26e639a3b9)
Fence Alignment (http://www.shopsmith.net/forums/showthread.htm?t=5204)
Drill chuck - Disassembly, inspection - This thread (http://www.shopsmith.net/forums/showthread.htm?t=4262&highlight=frozen+chuck)
Bearings (http://www.shopsmith.net/forums/showthread.htm?t=3235)
Gilmer clutch - Disassembly, cleaning, torque testing (http://www.shopsmith.net/forums/showthread.htm?p=32871#post32871)
Gilmer belt adjusting (http://www.shopsmith.net/forums/showpost.htm?p=78563&postcount=4)
Poly-V belt alignment - 1 (http://www.shopsmith.net/forums/showthread.htm?t=5546), 2 (http://www.shopsmith.net/forums/showthread.htm?t=3635),
Shopsmith parts and accessories (http://www.shopsmith.com/ownersite/partscat/partspricelistindex.htm) service site
Complete Mark V reassemble instructions (http://www.shopsmith.net/forums/showthread.htm?p=41339#post41339) by member JPG40504
Headstock disassembly instructions and parts list (http://www.shopsmithacademy.com/SS_Archives/SS122/SS122_Common_files/Blackboard_images/Inspection_and_Cleaning.pdf)
Disassemling and lubing a frozen drill chuck (http://www.shopsmith.net/forums/showthread.htm?t=4262&highlight=frozen+chuck)Restoration Threads - mickyd (http://www.shopsmith.net/forums/showthread.htm?t=3078), mikelst (http://www.shopsmith.net/forums/showthread.htm?t=5240), ddvann79 (http://www.shopsmith.net/forums/showthread.htm?p=77712#post77712), fiatben (http://www.shopsmith.net/forums/showthread.htm?t=5449)
Varioius paint color schemes - 1 (http://www.shopsmith.net/forums/showpost.htm?p=60834&postcount=10), 2 (http://www.shopsmith.net/forums/showpost.htm?p=60834&postcount=11), Heath's New Orleans Saints theme (http://www.shopsmith.net/forums/showthread.htm?t=4961), wannabewoodworker (http://www.shopsmith.net/forums/showthread.htm?p=64067#post64067)
Gallery of Restorations (http://www.shopsmith.net/forums/showthread.htm?p=63184#post63184)- DON'T MISS SEEING THIS THREADGeneral Information
Overall dimensions (http://www.shopsmith.net/forums/showpost.htm?p=59045&postcount=3) of a Mark 5 / V
Serial number data - Serial number table (http://www.shopsmith.com/ownersite/faq/markv.htm) from ShopSmith website, mickyd serial number table (http://www.shopsmith.net/forums/showpost.htm?p=37415&postcount=1) filling in the blanks on ShopSmith site table
Caster assembly instructions (http://www.shopsmith.net/forums/showpost.htm?p=62360&postcount=2), and this one (http://www.shopsmith.net/forums/showthread.htm?t=4110) too
Casting difference (http://www.shopsmith.net/forums/showthread.htm?t=3589&highlight=casting+tube)if you have 1-3/4" vs 1-7/8" bench tubes
Model 500, 505, 510, 520 differences (http://www.shopsmith.com/ownersite/MasterInside_4-28-08r2.pdf)
Model 510 lower saw guard on a model 500 (http://www.shopsmith.net/forums/showthread.htm?t=4566)
Mark 5 / V manual revision levels (http://www.shopsmith.net/forums/showthread.htm?t=4982)
Bench and way tube outside diameters (http://www.shopsmith.net/forums/showthread.htm?t=6342)
The Evolution of the Mark 5/V (http://www.songofthegreatlakes.com/ssmarkvevolution.htm) - Shows the ShopSmith throughout the years
Upper and lower sawgaurd - Mark 5 PN 505627 and 28 (http://www.shopsmith.net/forums/showpost.htm?p=79017&postcount=10), Mark 5 PN ?? (http://www.shopsmith.net/forums/showpost.htm?p=78980&postcount=4)
The mystery drips on the Mark 5/V legs - judaspre1982 and mickyd's (http://www.shopsmith.net/forums/showpost.htm?p=42973&postcount=14), fiatben's (http://www.shopsmith.net/forums/showpost.htm?p=66565&postcount=101)
Interesting machine modifications
Miter gage - Adding one (http://www.shopsmith.net/forums/showthread.htm?t=1708&highlight=miter+slot) to your extension table courtesy dusty
Model 500 table height adjustment handle knob conversion over to the circular style (http://www.shopsmith.net/forums/showthread.htm?t=895&highlight=height)
Installing 505/10/20 Crank (http://www.shopsmith.net/forums/showthread.htm?t=3302)on 500 table lift