Router Table, Opinions Please

[james.miller]

I have basically that router table as part of the Incra Ultimate Router Table Fence System. With the Incra it is mounted on the right side of the SS with the feather boards on the left side of the router table.

My personal opinion is that without the Incra Fence I would probably mount it so the feather boards were outboard and the fence inboard to make it more convenient to use the router table. Before changing anything I would try using it in the position you have it in to see how well it works.

[dusty]

ed

This is my immediate (no further delays permitted) solution to my router table fence requirement. I did change inserts for one with a smaller hole.

I am in the process of developing one with a 7" vertical backboard, dust collector system and sliding fence panels (left/right) to create the split fence.

The hang up is a method of attaching it to the table. I would like to eliminate clamps for this application if I can.

I would sure like to see a Sawdust Session that would cover how SS intended for the table (555995) to be used. I hope their only solution would NOT BE to utilize the Pro Fence (521963).

[reible]

ed

This is my immediate (no further delays permitted) solution to my router table fence requirement. I did change inserts for one with a smaller hole.

I am in the process of developing one with a 7" vertical backboard, dust collector system and sliding fence panels (left/right) to create the split fence.

The hang up is a method of attaching it to the table. I would like to eliminate clamps for this application if I can.

I would sure like to see a Sawdust Session that would cover how SS intended for the table (555995) to be used. I hope their only solution would NOT BE to utilize the Pro Fence (521963).

I see you have an idea of reusing some other hardware for your table. The issue here is going to be how to mount it and let it move inches back and forth... make sure you post some pictures of how you end up solving this.

While some solutions may exist it sure would be nice for Nick or someone to do a video of what they might have as solutions.... I'm sure the intent is to have you buy the additional hardware.

Keep us up to date.

Ed