Shopsmith Forums

Go Back   Shopsmith Forums > Main Woodworking Forum > General Woodworking
Register FAQ Members List Calendar Search Today's Posts Mark Forums Read

Thread Tools Search this Thread Display Modes
Old 11-16-2008, 01:18 PM
1940woodworker 1940woodworker is offline
Bronze Member
Join Date: Aug 2008
Posts: 5
Default Rolling pin handles

Can anyone tell me of a supplier for the hardware for rolling pin handles? I have looked on the web, but can not find any place that carries just the hardware. Any help would be great.

Reply With Quote
Old 11-16-2008, 03:13 PM
a1gutterman's Avatar
a1gutterman a1gutterman is offline
Gold Member
Join Date: Jan 2007
Location: "close to" Seattle
Posts: 3,608

Hi Dennis,
I did a Google search for "rolling pin hardware" and got many results, but nothing actually for any hardware to assemble rolling pins. Then I tried a Google search for "rolling pin parts" and, again got many results, including this one: , and this one: , and this was interesting too: . I do knot know if this helps any, but it might give you some ideas.

Buying US made products will help keep YOUR job or retirement funds safer.
Reply With Quote
Old 11-16-2008, 04:20 PM
john's Avatar
john john is offline
Gold Member
Join Date: Mar 2007
Location: St. Lambert , Quebec
Posts: 825


Those were interesting sites. Ironically, just the other day I was wondering about rolling pins so this question and your reply were very timely.

I don't think I will be attempting this any time soon!

Reply With Quote
Old 11-16-2008, 04:53 PM
beeg's Avatar
beeg beeg is offline
Gold Member
Join Date: Oct 2007
Location: St. Louis, Mo.
Posts: 3,763

This one from A1 show you how to make a rolling pin, you just need the wood for it.
SS 500(09/1980), DC3300, jointer, bandsaw, belt sander, Strip Sander, drum sanders,molder, dado, biscuit joiner, universal lathe tool rest, Oneway talon chuck, router bits & chucks and a De Walt 735 planer,a #5,#6, block planes. ALL in a 100 square foot shop.


Last edited by beeg : 11-16-2008 at 04:57 PM.
Reply With Quote
Old 11-16-2008, 11:58 PM
tom_k/mo's Avatar
tom_k/mo tom_k/mo is offline
Gold Member
Join Date: Jul 2008
Location: St. Louis, MO
Posts: 854
Send a message via MSN to tom_k/mo Send a message via Skype™ to tom_k/mo

Wish I could find a source for marble rolling pin rollers... I use quite a number of them in my sandcarving and I'm sure I could make the rest of the parts and assemble cheaper than purchasing & shipping... They make a nice kitchen decoration with the family name carved in them. Here's what they look like.
ShopSmith MarkV-520 with Belt Sander, Jointer, Band Saw, Strip Sander, Scroll Saw and Biscuit Jointer SPTs and a DC-3300...
Woodworking Hobbyist (Check out all my Woodworking Plans (
Aspiring Sandcarver: Breaking glass one grain at a time.
Black Powder Shooter (love the smell of burning sulfur).
Reply With Quote
Old 11-17-2008, 05:23 AM
sandyj sandyj is offline
Gold Member
Join Date: Feb 2008
Location: Auckland, New Zealand
Posts: 75
Send a message via Yahoo to sandyj

A couple of years back I turned several rolling pins complete with handles attached (fixed) in place. These were christmas gifts that were well recieved and are in constant use.
I got a rough overall cylinder shape and used the 12 inch sanding disk with 100 grit paper and held over the top of the cylinder and it did a great job of smoothing off the rolling pin. I followd through up to 320 grit.
The handles were an exercise in using a skew chisel and if both handles were not quite exact, that did not matter too much as it gave the rolling pin that hand made look and feel.
The wood was basic hard wood - oak I think.
Finished with organ oil hi-speed finishing oil
Give it a go and surprise yourself - great fun and a learning experience.
Sandy in NZ
1960 SS500, Magna Jointer & Dado. [I]Hailing from New Zealand [/I]
Reply With Quote

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Overarm Pin Router first impressions gregf Woodworking Tool Review 7 09-27-2008 11:20 PM
Pin Chuck easterngray General Woodworking 10 07-17-2008 11:29 PM
Popular Mechanics Overarm Pin Router Ron309753 Woodworking Tool Review 2 07-04-2008 11:07 PM
Ring Master Index Pin wgander Woodworking Tool Review 18 05-06-2008 06:33 PM

Powered by vBulletin Version 3.5.4
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.